Our Pressure Control Units are compatible with a variety of pre-clinical and clinical catheters, offering quick calibration and dynamic zeroing for accurate pressure measurements.
The TC-510 is a passive interface that connects pressure transducers to clinical monitors, such as most standard cath lab systems. Key features include:
Ideal for cath labs that need accurate, reliable integration with strain gauge pressure monitors.
Product Reference | 851-5918 |
Isolated Input/Output | No |
Input Connector | Viking |
Output Connector | 9 Pin DIN |
Passive/Active | Passive |
Sensor Sensitivity | 5 µV/V/mmHg, nominal (37.6 µV/V/kPa) |
Power | External bridge amp |
Repairable | Yes |
Compatible Cable | Millar TEC-10D cable featuring a low-profile catheter connector and Viking control unit connector. The cable length is 10 feet (305 cm). |
The PCU-2000 is a dual-channel, patient-isolated, line-powered bridge amplifier designed for easy integration with patient monitors and data systems. Key features include:
A versatile, safety-focused solution for accurate catheter-based pressure monitoring.
Product Reference | 880-0129 |
Isolated Input/Output | Yes |
Input Connector | Redel |
Output Connector | 1/4-inch phono jack |
Passive/Active | Active |
Power | Line-powered |
Repairable | Yes |
Compatible Cable | Millar PEC-10D cable featuring a low profile catheter connector and Redel control unit connector. The cable length is 10 feet (305 cm). |
PowerLab is a data acquisition (DAQ) device capable of recording at speeds of up to 400,000 samples per second continuously to disk (aggregate). PowerLab is designed to meet the strictest international safety standards and is compatible with instruments, signal conditioners and transducers supplied by ADInstruments and others.
LabChart data analysis software synchronizes input from multiple recording devices, allowing real-time acquisition, display and analysis of up to 32 biological signal channels with advanced calculations as experiments progress.
Combine the Millar PCU-2000 Pressure Control Unit, an 8-channel ADInstruments PowerLab Data Acquisition System, and LabChart Pro Analysis software with our OEM MEMS sensors or modules to test pressure sensor integration with your medical device development projects.
The TC-510 is a passive interface control unit, ideal for connection to a clinical monitor. The PCU-2000 is a powered, two-channel bridge amplifier with built-in excitation and patient isolation.
Both units support a variety of pre-clinical and clinical catheters. Always confirm compatibility based on your catheter model and monitor setup.
Millar control units are designed to interface with most standard cath lab monitors and standalone data acquisition systems using analog voltage outputs (typically 1V/100 mmHg).
The in-line power supply automatically adapts to 100–240V AC and includes a long cord for flexible placement outside the sterile field. The PCU-2000 should be used with the included power cord.
The in-line power supply automatically adapts to 100–240V AC and includes a long cord for flexible placement outside the sterile field. The PCU-2000 should be used with the included power cord.
Yes. Both TC-510 and PCU-2000 output standard analog signals are compatible with systems like LabChart, enabling real-time data visualization and analysis.
Yes.